1200 Nm To Ft Lbs (2024)

FAQs

How many ft/lbs is 1000 Nm? ›

One foot-pound (ft/lb) is equal to 1.356 newton-meters (Nm). To convert newton-meters (Nm) to foot-pounds (ft/lbs) all you need to do is divide your figure (Nm) by 1.356.

My original answer when divided by 9.8m/s² equals about 8.85 ft. lbs which is consistent with the other answers and expresses the answer in lb. force.

How is torque measured? Torque is usually measured in Newton metres (Nm) or you might see the imperial measurement of lb-ft (pounds-feet), although this unit of measurement is pretty outdated by now. If you want to calculate the conversion for yourself, 1 Nm is equivalent to 0.738 lb/ft.

Complete with a whopping 7,376 pound-feet (10,000 Newton-meters) of torque, it has the ability to sprint to 60 miles per hour (96 kilometers per hour) 1.9 seconds, and continue on to a top speed of 250 mph (402 kmh).

Conversion Formula: Newton Meters x 8.85074579 = Inch Pounds

800-871-5022 More information can be found at www.HQ-Drill.com.

40Nm means a moment of 40N - equal to around 4kg, at a distance 1 meter from the pivot. You could get place a 4kg weight on a 1m bar.

What is 20 Nm in foot pounds? ›

8 ft lbs is almost nothin'. Translation = snugged down with your smallest ratchet. 8 ft lbs is almost nothin'.

A pound-foot (lb⋅ft), abbreviated from pound-force foot (lbf · ft), is a unit of torque representing one pound of force acting at a perpendicular distance of one foot from a pivot point. Conversely one foot pound-force (ft · lbf) is the moment about an axis that applies one pound-force at a radius of one foot.

The foot-pound force (symbol: ft⋅lbf, ft⋅lb_f, or ft⋅lb) is a unit of work or energy in the engineering and gravitational systems in United States customary and imperial units of measure. It is the energy transferred upon applying a force of one pound-force (lbf) through a linear displacement of one foot.

One newton-metre is the torque resulting from a force of one newton applied perpendicularly to the end of a moment arm that is one metre long. The unit is also used less commonly as a unit of work, or energy, in which case it is equivalent to the more common and standard SI unit of energy, the joule.

15Nm is 11.6 ft-lbs ............. and if I can't pull that hard with an Allen key, it won't be tight enough? As above on the torque that is sometimes needed on saddle bolts. (And to 3 significant figures it's 11.1 ft lb.)

First, determine the torque applied (in Nm). Next, determine the radius (in inches) from the center of rotation to the point where the force is applied. Use the conversion formula: Psi = (Torque * 8.85074579) / (π * Radius^2). Finally, calculate the pressure in Psi.